Service manuals, schematics, documentation, applications, datasheets, electronics
|
|
|
|
|
Why is effective isolation important during test? |
|
According to Yeo Siok Been of Avago Technologies, safety isolation is important for test and measurement equipment to ensure data integrity and to protect test operators. Isolators are selected based on its speed performance and most importantly, based on its insulation levels and ratings to meet r...
2008-02-01 00:00:00
|
|
| |
|
Solving PCIe compliance, interoperability issues |
|
Since its inception more than five years ago, PCIe technology has become the dominant interconnect protocol across virtually all market segments. There are many challenges involved in verifying device compliance and interoperability. This article discusses these challenges, and proposes the Denali ...
2008-02-01 00:00:00
|
|
| |
|
High - speed SRAMs roll into production |
|
GSI Technology announced full production versions of both 36Mbit and 72Mbit SigmaQuad-II SRAMs, which are available in both commercial and extended temperature ranges. ...
2008-02-01 00:00:00
|
|
| |
|
Boosting wireless subsystem performance |
|
Significant improvements in the performance of signal processing functions in wireless systems can be realized by taking advantage of the flexibility of FPGA fabric and the embedded DSP blocks in current FPGA architectures for operations that can benefit from parallelism. ...
2008-02-01 00:00:00
|
|
| |
|
Maximize mobile WiMAX opportunities |
|
Mobile WiMAX—based on the IEEE 802.16e standard—is a major, long-term opportunity for service providers, device makers and chipset vendors. To capitalize on that opportunity, both service providers and device makers should pay close attention to not only the Wave 2 chipset feat...
2008-02-01 00:00:00
|
|
| |
|
|
|